AAR Tool Repair

Orgapack OR-T Tool repair & Wear Parts

The OR-T-400 tool has a service friendly construction. Any wear and tear during continuous use of this tool can be easily fixed. The wear parts of this tool are easily available. In the auto mode this tool works efficiently at the touch of the button and this is also one of the reasons that this tool has become a staple in many industries.

The most common OR-T 400 wear parts include:

1821.047.022 Tension Wheel

1821.209.022 Knife

1821.048.017 Tooth Plate

2187.003 Battery 18V/2.6 Li- Ion

These wear parts can be ordered online from Allstrap Tool Repair. According to Allstrap this is a great tool where feeding the strap is easier as the jaws open wider in this tool. This is not possible with other similar tools from other brands. Also being a combination tool that tensions, seals and cuts is a great advantage and saves a lot of time. Using the friction weld sealing is also an advantage as it eliminates the cost of stocking on metal seal. For more information, call Allstrap! .

_______________________________________________________________________

Fromm A480 Details & Wear Parts 

The A480 is a more mobile and lightweight tool by Fromm and this tool is popular and a staple in many packaging industries. This is a pneumatic combination pusher type steel-strapping tool and it need not necessarily be suspended. It is a great tool to strap wire coils, tubes and small bundles. This is a convenient and lightweight tool as it is compact in size and operators find it easy to handle.

• Strap Qualities:  High tensile (Ultraflex)
• Strap Dimensions:  10.0 – 19.0 x 0.38 – 0.63 mm / 3/8 – ¾” Wide x .015 – .025″ Thick
• Tension Versions:  2500 N, 4500 N
• Sealing Type: .75 Inch Push Seal
• Weight: 4.5 kg / 9.9 pounds

The advantages of the A480 are that as it is light in weight, applications can be completed in a very short time. It is also unique in the sense that its footplate is relatively smaller than in other tools and this makes it possible to strap round and awkward packages. The small footplate can squeeze itself into a tight space and so this is possible.

The A480 also has a friendly user interface. It also provides a great joint and bonding strength of about 75%.  The cutter depth and the distance between the roller and pad is adjustable and can be fitted to desired requirements. Industry experts have said that this tool has been well received in the industry and people consider this tool more efficient and convenient than other pneumatic tools in the market.

The wear parts of the A480 are easily available. Either it can be ordered online or bought from leading dealers of branded tools like Allstrap. The common wear parts for the A480 include:

Feed wheel A48.1221

Cutting Jaw A48.1101

Notching Knife A48.1105

Cutter A48.1124

Cutter Jack A48.1128

Slide Plate A48.1213

Vane L2.1304

Being a combination tool, the A480 can tension, seal and cut and there is no need to look for a separate sealer or cutter. The tool uses push seals and the seal is pushed by the tool with the steel threaded to pull sufficient tension. Due to this it is ideal for round and narrow packages. The A480 comes with two different tensioning levels. As with all Fromm tools, this tool is also ergonomically designed and a safe and easy to operate tool.

Allstrap also has a full-fledged repair facility with trained technicians who undertake repairs of tools at a nominal cost. Call Allstrap’s customer department for more information.

———————————————————————————————————–

A483- AAR Tool Repair & Parts List

According to Allstrap, a dealer of Fromm tools and certified Fromm repair facility, the A483 is the best push style tool for high tensile heavy duty strapping. This tool does a great job with heavy loads without breaking down.

Allstrap is not only a dealer of strapping tools, they have a full fledged strapping tool repair department that services tools using manufacturer certified technicians. These technicians are knowledgeable about tools and diagnose the problem, replace with spare parts if needed and return the tool back in a short time.

A483 Wear Parts

#A38.1351 VANE

#A38.2310 TENSIONING WHEEL

#A48.2120 CUTTER JACK

#A48.3113 CUTTING JAW

#A48.3116 NOTCHING KNIFE

#A48.3209 SLIDE JAW

#A48.3213 TENSIONING BODY

These tool parts are bound to get damaged with continuous use in heavy duty industries. In order to keep the tool in working order, it has to be maintained properly. Cleaning and oiling are recommended by the manufacturers and Allstrap so that the tools work for a long time in good condition.

In case of damage or repair to any tool, it would be best to send it to a knowledgeable repair center. Allstrap stocks major brands of tools and tool parts, call Allstrap strapping tool repair service for more information.

_________________________________________________________________________

AAR Approved Tool: CR-25A Tool Repair

Allstrap has technicians who are manufacturer certified. These trained technicians assess the damage to the tool, repair and replace spare parts if required.

Given below are the wear parts of the CR-25A that can get damaged in the tool.

1820.040.100 Tension wheel

1174.200.152 Cutter complete 13 mm

1174.200.124 Cutter complete 16, 19 mm

1174.200.146 Strap guide 13 mm 1

1174.200.147 Strap guide 16 mm

1174.200.145 Strap guide 19 mm 1

1921.902.085 Roll pin, ø 2,5 x 8

1174.200.141 Jaw 13 mm 2

1174.200.142 Jaw 16 mm 2

1174.200.143 Jaw

1820.010.209 Torque spring

1820.010.211 Torque spring

112 1820.010.210 Torque spring

1820.010.010 Compression spring

The CR25A is a battery strapping push type combination tool from Orgapack. This tool uses a closed push type seal and the feedwheel pulls the tension. It is a light weight tool and very efficient. Allstrap stocks all tools from Ograpack.

Call Allstrap for tool repair and pricing.

_________________________________________________________________________

AAR Approved Tool: PN2-114 Tool Repair

The PN2-114 is a pneumatic pusher type tensioner from Signode. As one of the most popular Signode tools, Allstrap stocks wear parts and has a certified Signode tool repair department on site. All parts that Allstrap fixes are ordered from the manufacturer and usually have a one week turnaround time. Allstrap services all of the leading manufacturer strapping tool brands such as Signode, Fromm, Orgapack, MIP, Golden Bear, Titan and more. 

Tool repairs should be undertaken only by knowledgeable and trained technicians. Allstrap has manufacturer certified technicians to repair banding tools and replace parts. Below is a list of the most popular PN2-114 tool wear parts.

PN2-114 Tool Parts List

Feedwheel #423398

Flange Bearing #423518

Pivot Pin #423516

Foot Spring #423548

Breaker Foot #423514

Breaker Nose #423513

Nose Pin #252262

Bushing #423521

Roller #423517

Roller Pin #423524

Gear Housing Assembly Parts List

Idler Gear #008766

Worm-gear #423529

Air Motor Parts List

Valve Stem #024662

O-Ring #004164

Bearing #024633

Back End Plate #024653

Rotor #423423

Vane #024651

Front End Plate #423794

Idler #423060

When a tool is put to regular use the wear parts are more likely to get damaged. One of most common wear parts is the feedwheel. The feed wheel (423398) is the part that ensures uniform and precise tension with each application. To ensure that your tool is functioning at 100 percent, it’s important to clean the tool daily and apply machine oil to all moving surfaces.

Allstrap is a dealer who is well known for the tools they stock and also for tool repair. Call Allstrap Tool Repair for your tool needs and repairs.