Signode’s Grippack Family

The Signode Grippack Family comprises of the most powerful battery-powered steel strapping tools designed for heavy-duty applications. It includes a tensioner, sealer, and cutter that can accept steel straps of width 3/4” to 1-1/4”. These lightweight tools can be easily carried around while providing many advantages over manual and pneumatic tools.

Grippack 114 Tensioner

The Grippack 114 Tensioner is a pusher-type steel strapping tensioner that uses duck bill nose for pulling tension and pushing seals. If you are looking for the most convenient battery-powered tool, this is the ideal option. It generates 1,500 lbs of tension. Thus, it can generate the tensioning force of a pneumatic tool without the cost and inconvenience of air lines The Li-Ion battery powered tool delivers reliable performance and can complete a maximum of 120 cycles per charge

Technical Specifications

The main technical specifications of this Signode tool are as following:

Strapping: Steel Strapping (Apex Plus or Magnus)
Strap Size: Width 3/4” (19mm) to 1-1/4” (32mm) & thickness 0.025” (0.64mm) to 0.031” (0.80mm)
Weight: 8.5 lbs or 3.8 kg
Adjustable Tension: 800 lbs (3600N) – 1500 lbs (6670N)

Grippack 114 Sealer

The Grippack 114 Sealer complements the tensioner with its single-button operation, light weight, and high performance. This is a semi-automatic steel strapping tool that applies a single reverse notch seal.

Technical Specifications

The key technical specifications of this Grippack Family tool are as following;

Strapping Type: Steel Strapping
Strap Size: Width 1-1/4” & Thickness 0.025” to 0.031”
Seal: Single Reverse Notch 114P & 114OF
Weight: 8 lbs

Grippack Cutter

The Grippack Cutter completes the series and is a versatile tool. It can be used for strapping steel and plastic straps of width up to 1-1/4” and thickness 0.057”. It can complete 240 cycles per charge and is a lightweight tool.

Technical Specifications

The main technical specifications of the this battery-powered cutter from Signode are as follows:

Strapping: Steel & plastic straps
Strap Size: Max thickness 1-1/4” (32mm) & width 0.057” (1.45mm)
Weight: 7.5 lbs or 3.4 kg
Performance: 240 cycles per charge

Main Features

The main features of Signode’s Grippack Family are as follows:

Heavy duty construction. Made of high-impact resistant nylon
The cutter can cut a max of 2 straps of thickness 0.044”
The special design allows easier strap entry
The cutter can last over 50,000 cycles
The special design protects the user from springing back strap
All the tools are designed for single-hand operation

Accessories

All the different accessories and wear parts are readily available for the tensioner, sealer and cutter. You can also order notcher, lower jaw pin, jaw, upper jaw pin, rubber boot, and other common wear parts.

Check us out at Allstrap.com or give us a call at (866)-779-2673 for all your strapping needs!